This tutorial can be used to upgrade,downgrade and flashing of dead phones.
By The Way, this application works for XP n Vista, x86 or x 64!!!
Case Problem:
A: I installed a unsupported version of an app on N8 which autostarts on each boot. When i opened the app it freezes the fone and fone restarts. After restart it opens the app and freezes and restarts ....so it keeps on restarting the fone so i had no option but to full format my fone.Problem Solving (How To):
After formatting i found that Nokia ovi maps and ovi store is being removed from fone which were installed on my N8 by default. So i downloaded the latest Nokia Ovi Store App Client and tried to install but it fails to install and gives a error message - "Unable to install" .
I tried all ways to install it but was unsuccessful. I think there is no way to install it again which is quite surprising to say. So can anyone suggest me a way to install Nokia Ovi Store App Client back on my N8?
B: Here's a guide how to solve deleted Ovi Store on N8. This could be used on N97. Softwares are Phoenix and Navifirm method. Should be the same on N8. Some says they could only use the Navifirm. Check Below
Tools Required:
Download --> Read Tutorial:
1.Phoenix Service 2009 suite:
2.Navifirm:
Before Flashing:
- backup your phone number and phone number of important personal information. If you want a clean installation, format your E: drive as well using the built in Nokia file manager .
Lets Start…….
->Run Phoenix Service Software installer.
>Start Installing Phoenix
-> Now (the boring part) run Navifirm (it takes an hour or more to download the whole patch)…
Note: the reason i don’t use the builtin image downloader because it downloads older versions, from my experience.
After the files downloaded, copy them to C:\Program Files\Nokia\Phoenix\Products\RM-505\
->Now Run Phoenix 2009
->Turn on the phone (it will start in offline mode because there is no SIM card inside).
->Plug in the USB cable to both the phone and the computer.
->When prompted, select “PC Suite” from the menu list on the phone.
->Wait for *all* drivers to fully install themselves before proceeding. You will see the driver icon disappear when it is complete.
-> Now Choose File Then Manage Connection
->###### “New”
->###### USB, and then ###### Next
->It will then search your USB ports for the phone. When it finds it, hit Finish
->Once it has finished scanning, ###### apply, then ###### close.
->Next, select “Scan Product” from the File menu.
-> Once finished scanning, you can see your model of phone and other details at the bottom screen.
->From the Flashing menu, choose Firmware Update.
->Wait for Phoenix to continue talking to the phone. You will see some information scroll by in the firmware Update window.
->###### Browse
->See the product code section.U should find ur product code in that column.If u see “ur” product code,well and good.
-> but if u dont see ur code,or dont see anything for that matters,press on the “…” in the given prCode section.
You should see RM505-blabla, select that. Variant version =00. I will select “Refurbish” so that it will
restore it to factory set (Clean and default C:).
->Press Start
Ignore the warning and click YES
The flashing process takes about five minutes to complete. The first few steps ensure connectivity to the phone.
After it verifies connectivity,Phoenix will automatically restart the phone.
Once it has completed (a dialog box will popup saying it has completed successfully), you may close Phoenix,
unplug the USB cable, and restart your phone. It should startup with the firmware you flashed to it.
Source: I edited the tutorial from somewhere, kinda lost track of the author. His tutorial is for other phone, i added and modified for N97. Btw, i flashed my N97 so many times.
0 comment:
Post a Comment
SILAKAN BERIKAN KOMENTAR KALIAN DISINI UNTUK MENDAPATKAN KESEMPATAN MEMENANGKAN PULSA GRATIS senilai 25 RIBU RUPIAH